DOOR LEAF CONSTRUCTION
|Construction||Fire-resistant Polyisocyanurate (PIR) insulation material with a foam density of 40 kg/m3. |
Covered on both sides with a 0.5 mm PPGI steel flat sheet with a polyester coating.
|Thickness of Door Leaf||100 mm.|
|R-value (door leaf panel only)||Approximately 4.67 m2K/W.|
|Hinges||In composite material, low temperature and anti-corrosive. |
Adjustable in three directions.Theft-proof pin and tamper-proof fixing with door closed.
Auto-lubricating hidden ramps.
|Wall Frame||Anodised aluminium profiles with thermal breaks to prevent heat bridges.|
|Door Frame||Anodised aluminium profiles with a complete thermal break, fitting the wall.|
|Frame Heating||Included in three sides of the door frame and in the bottom of the door leaf.|
|Sealing||Whole perimeter is sealed by means of rubber profiles.|
|Key Lock||Supplied with key lock and internal safety release (push-button).|
|Additional Options for Stainless Steel (SS)||SS finish of the clear opening, SS key locks, |
SS door leaf sheet, door profiles and wall frames.
LIST OF OPTIONS
- Choice of colours - subject to availability
- Double Leaf hinged door
- Vision panel (depending on size of door)
- Door closer
- Panic bar