HORIZONTAL SLIDING DOORS (FREEZER-TYPE)
TECHNICAL SPECIFICATIONS
DOOR LEAF CONSTRUCTION
| Construction | Door leaf constructed with a fire-resistant Polyisocyanurate (PIR) insulation material with a foam density of 40 kg/m3. Both sides are covered with 0.5 mm PPGI steel flat sheet with a polyester coating. |
| Thickness of Door Leaf | 140 mm (Freezer), 100 mm (Chiller). |
| R-value (door leaf panel only) | Approximately 6.67 m2K/W (Freezer), Approximately 4.76 m2K/W (Chiller). |
| Standard Door Leaf Colour | Light Grey RAL 9002. |
| Wall Frame | Anodised aluminium profiles with thermal breaks to prevent heat bridges. |
| Door Frame | Anodised aluminium profiles with a complete thermal break fitting the wall. |
| Frame Heating | Included in three sides of the door frame (Freezer only). |
| Sealing | Whole perimeter is sealed with rubber profiles. |
| Rail System | Anodised aluminium drop/lift rail system, type SRA with dust cap. |
| Operation | Manual or Electrical (Power supply 230 V, single phase, 50 Hz, 20 Amp). |
| Openers | Available inside and outside. |
| Additional Options for Stainless Steel (SS) | SS bumper, SS finish of the clear opening, SS rain cap, key locks, electric system as per CE standards threshold heater. SS door leaf sheet, door profiles and wall frames. |
LIST OF OPTIONS
- Key locks with internal safety release.
- Threshold heater (freezer door only).
- Choice of colours - subject to availability.
- Crash protection bumper (outer door leaf only).
- Various potential free contacts.
- Vision panel (depending on size of door).
